Following Garbaruk guidelines will guarantee seamless drivetrain operation with your new components
FOLLOW THE STEPS BELOW TO INSTALL GARBARUK RD CAGE ON SRAM 11/12-SPEED REAR MECH
TABLE OF CONTENTS
- Tools you will need
- STEP 1: Fix the cage in place using the cage lock
- STEP 2: Undo the cage set bolt
- STEP 3: Unmount the derailleur cage
- STEP 4: Remove derailleur pulleys
- STEP 5: Prepare Garbaruk RD cage for installation
- STEP 6: Install Garbaruk RD cage
Tools you will need
In order to install Garbaruk RD cage seamlessly, you will need the following tools:
- 3mm Allen key
- 2mm Allen key
STEP 1: Fix the cage in place using the cage lock
STEP 2: Undo the cage set bolt
STEP 3: Unmount the derailleur cage
Disable the cage lock and decompress the clutch spring by rotating the cage counter-clockwise
Unscrew the derailleur cage bolt. After that the cage can be removed
STEP 4: Remove derailleur pulleys
STEP 5: Prepare Garbaruk RD cage for installation
Unscrew the cage bolts as shown on the picture below
Install the derailleur pulleys
Tighten the derailleur pulleys and cage bolts
STEP 6: Install Garbaruk RD cage
Turn the cage clockwise by 1 turn and enable the cage lock
Tighten the cage set bolt (lower picture is applicable for 12-speed derailleurs, upper one for 11-speed derailleurs)
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article